Home › Text & Utility › Suit Size Converter
Text & Utility

Suit Size Converter

A men's suit size is the chest in inches, and the rest of the system follows from that one number: the UK and US use the same number, Europe adds 10, and the trouser waist of a matched suit is usually 6 inches smaller than the jacket — the standard drop. This page converts men's suit sizes between US/UK, EU and chest measurements from the published standard table, and adds the jacket length (Short, Regular, Long or Extra Long) from your height, so a suit ordered from another country arrives in the size you actually wear.

Free · No sign-up · Runs in your browser · First published 2026-10-29 · Updated November 2026

Suit sizes run in even numbers from 34 to 52. US and UK sizes are the same number; EU is that number plus 10. The trouser waist uses the standard drop of 6 inches — athletic cuts use a drop of 8 and larger builds a drop of 4, so check the brand's trouser waist if your build is not average. Jacket length is a height guide, not a measurement: the jacket should cover your seat and let your shirt cuff show about half an inch.

Your suit size
—

One number, three labels

A men's suit size is refreshingly simple once the labels are separated: the number is the chest measurement in inches. A man with a 40-inch chest wears a US 40 and a UK 40 — the two markets use the same number, and what changes between them is the cut, not the size: British tailoring tends toward more structured shoulders, American toward a softer shoulder, so the same number can feel closer fitting in one than the other. Europe uses a different number for the same chest: add 10. A US/UK 40 is an EU 50, a 42 is an EU 52, and the rule holds across the whole table, whether the label is Italian, French, German or Spanish. The letter after the number — 40R, 40L — is not a second size but the jacket length, set by height: Short under about 5 ft 8 in, Regular to 6 ft 0 in, Long to 6 ft 4 in, and Extra Long above that.

Bar chart of EU suit numbers by US/UK size: 36 is EU 46, the worked example 40 is EU 50, 44 is EU 54, 48 is EU 58 and 52 is EU 62
EU suit numbers, drawn as bars: the worked example below sits at US/UK 40 = EU 50.

Worked example: a US 40, 178 cm tall

Take a US 40 and a height of 178 cm. The row gives EU 50, chest 102 cm, trouser waist 34 inches — 40 × 2.54 = 101.6 cm, shown as 102, exactly the published figure, and 40 − 6 = 34 for the standard drop. At 178 cm the length guide gives Regular (R), so the full size is 40R. Four more rows prove the table holds: a 36 is EU 46, chest 91 cm, trouser 30 inches (36 × 2.54 = 91.44, shown as 91); a 44 is EU 54, chest 112 cm, trouser 38 inches; in reverse, EU 52 is a US/UK 42, chest 107 cm, trouser 36 inches; and a chest of 44 inches is EU 54, trouser 38 inches. Lengths follow the height, not the chest: 170 cm gives Short, 190 cm gives Long, and a height over 193 cm gives Extra Long.

Men's suit size table

US / UKEUChest (cm)Trouser waist (in)
34448628
36469130
38489732
405010234
425210736
445411238
465611740
485812242
506012744
526213246

Jacket lengths by height

LengthHeightTypical jacket length
Short (S)Under 173 cm (under 5 ft 8 in)28–29.5 in
Regular (R)173–184 cm (5 ft 8 in–6 ft 0 in)30–31.5 in
Long (L)185–193 cm (6 ft 1 in–6 ft 4 in)32–33.5 in
Extra Long (XL)Over 193 cm (over 6 ft 4 in)34 in and over

How to read your result, and its limits

Three checks before ordering. First, measure the chest, not the jacket you own: tape around the fullest part of the chest, under the arms, kept level, arms relaxed — and if the measurement falls between two even sizes, take the larger one, since a tailor can take a jacket in by an inch or two but cannot let a tight chest out. Second, treat the drop as a default, not a promise: the standard drop is 6 inches, but athletic cuts use 8 and larger builds 4, so a matched suit's trouser may need swapping for your waist even when the jacket is right — many retailers sell the two separately for exactly this reason. Third, the number says nothing about the shoulders: shoulder width and posture are what a tailor cannot cheaply fix, so if two sizes both close at the chest, choose by which one's shoulder seam sits on your shoulder bone, and let the tailor adjust the sleeves and waist from there.

Related tools: Clothing Size Converter — Men's and women's clothing sizes between US, UK and EU — with the measurements behind them; Shirt Size Converter — Men's dress shirt collars — inches, neck centimetres and EU size, plus sleeve lengths; Pants Size Converter — Men's and women's pants sizes — US, UK and EU, with inseam.

Frequently asked questions

What is a US 40 suit in EU size?

EU 50. Add 10 to the US/UK number to get the EU size: a US 40 is an EU 50, a US 42 is an EU 52, and the rule holds across the whole table.

Are US and UK suit sizes the same?

Yes, by number: a US 40 and a UK 40 are both cut for a 40-inch chest. What changes between the markets is the cut, not the number — British tailoring tends toward more structured shoulders.

What does 40R mean on a suit?

40 is the chest in inches and R is the jacket length: Regular, for heights from about 5 ft 8 in to 6 ft 0 in (173–184 cm). S is Short, L is Long and XL is Extra Long.

What trouser waist comes with a 40 jacket?

Usually 34 inches, from the standard drop of 6 inches (jacket minus waist). Athletic cuts use a drop of 8 and larger builds a drop of 4, so check the brand's trouser waist if your build is not average.

Ahsan ul Haq
Editor, ToolFigure

Every ToolFigure calculator is checked against hand-worked examples before it is published — the same worked examples you can follow on each page. More about ToolFigure →

Related tools

Calculators that show their working

Free forever · No sign-up · Every result comes with its formula and a worked example.

Browse all tools