Four lines that make a driveway price: material, thickness, site, removal
A driveway price is a base rate per square foot set by the surface material, multiplied by a thickness factor and a site factor, plus removal of the old driveway, then multiplied by a region factor:
base rate per sq ft ($) = $4.00 gravel · $3.50 tar-and-chip · $9.50 asphalt · $11.50 concrete · $22.50 pavers
total ($) = (length (ft) × width (ft) × base rate × thickness factor (×0.85 light · ×1.00 standard · ×1.20 heavy-duty) × site factor (×1.00 flat · ×1.15 sloped · ×1.30 major grading) + removal $2.50 a sq ft) × region factor (×0.90 low-cost · ×1.00 average · ×1.10 high-cost)asphalt tons = area (sq ft) × depth (in) ÷ 12 × 148 lb per cu ft ÷ 2,000 — 2 in light · 3 in standard · 4 in heavy-dutyconcrete or gravel cubic yards = area (sq ft) × depth (in) ÷ 12 ÷ 27 — concrete 3 in light · 4 in standard · 6 in heavy-dutycost per year ($) = total ÷ lifespan in years (15 gravel · 20 tar-and-chip · 25 asphalt · 40 concrete · 40 pavers)planning range = total × 0.85 to total × 1.15The same formula is behind the table above, so every row can be rebuilt by hand. The worked example is a 20 ft by 24 ft driveway — 480 sq ft — in asphalt at standard thickness on flat ground, no removal, average region: 480 × $9.50 × 1.00 × 1.00 is $4,560.00 — $9.50 a sq ft, about 8.9 tons of hot-mix asphalt at 3 in compacted, $182.40 a year over the 25-year life of asphalt, with a planning range of $3,876.00 to $5,244.00.
Worked example, checked against the published calculators
Five published 2026 driveway cost guides bracket the worked example rather than matching it to the dollar, because no two guides use the same per-square-foot rate — and the bracket is the honest check. DrivewaySource's calculator puts a 480 sq ft asphalt driveway at about $4,440 typical, inside a $2,400 to $6,240 range, at about $9.25 a sq ft typical inside a $5.00 to $13.00 band, and 8.9 tons of hot-mix at 3 in compacted — this page's $4,560.00 sits inside their range, its $9.50 rate sits inside their band, and its 8.9 tons matches exactly. GarageCalculator puts a two-car driveway at $3,600 to $5,000 in asphalt, $4,000 to $5,550 in concrete, $1,300 to $1,750 in gravel and $6,950 to $9,650 in concrete pavers — this page's $4,560.00 and $5,520.00 sit inside the asphalt and concrete ranges, while its gravel at $1,920.00 sits just above their gravel range and its pavers at $10,800.00 above their paver range, because their bands are narrower than HomeProjectCalculator's. HomeProjectCalculator puts installed asphalt at $7 to $12 a sq ft, concrete at $8 to $18, gravel at $2 to $6 and pavers at $15 to $30 — this page's $9.50, $11.50, $4.00 and $22.50 sit inside all four bands. AsphaPro puts asphalt at $4 to $7, concrete at $6 to $11, gravel at $1 to $3 and pavers at $10 to $25 a sq ft installed — below this page's rates, because their figures run closer to materials than to installed work. EverydayBudd's layer-by-layer model prices 600 sq ft of asphalt at $2,400 to $4,800 — $4.00 to $8.00 a sq ft — below this page's $9.50, because it prices materials and labour per layer before the base, edging and contingency that the installed guides include. The table rows show the model's edges: a heavy-duty concrete driveway on a slope with removal is $11,022.00, $18.37 a sq ft, and a paver driveway in a high-cost region is $11,880.00, $24.75 a sq ft.
How to read your result, and its limits
Four cautions keep the number honest. First, the installed rate carries everything: the material, the labour, the gravel base and the contractor's margin are inside the rate — EverydayBudd splits asphalt into $4.50 a sq ft of material and $2.00 of labour, $3,120.00 for the worked example's 480 sq ft before the base and contingency, against this page's $4,560.00 installed, and the two are not comparable. Second, thickness is the multiplier: the same 480 sq ft asphalt driveway is $3,876.00 at light thickness, $4,560.00 at standard and $5,472.00 at heavy-duty — a quote that names the material but not the thickness is not comparable with another quote. Third, the site and the removal are the swing: major grading adds 30% — the worked example on a site needing major grading is $5,928.00 — and removing the old driveway adds $2.50 a sq ft, $1,200.00 on 480 sq ft, taking the worked example to $5,760.00. Fourth, the cheapest surface is not the cheapest per year: the gravel driveway in the chart is $1,920.00 over 15 years, $128.00 a year, while the concrete driveway is $5,520.00 over 40 years, $138.00 a year, and the asphalt driveway is $4,560.00 over 25 years, $182.40 a year — concrete costs less per year than asphalt despite costing $960.00 more up front, and pavers at $270.00 a year cost the most per year of all. The quantities are worth ordering right — the concrete calculator prices the mix for the slab, and the gravel calculator prices the base stone underneath it.
Common mistakes
- Comparing a materials-only price with an installed price. EverydayBudd puts asphalt material at $4.50 a sq ft — $2,160.00 for the worked example's 480 sq ft — against this page's $4,560.00 installed; a materials-only quote looks cheaper by $2,400.00 because it leaves the labour, base and margin out.
- Forgetting the thickness. The same 480 sq ft asphalt driveway is $3,876.00 at 2 in, $4,560.00 at 3 in and $5,472.00 at 4 in — a quote that ignores the thickness understates a heavy-duty driveway by $1,596.00.
- Forgetting the removal. Old driveway removal is $2.50 a sq ft — $1,200.00 on 480 sq ft — so the worked example with removal is $5,760.00, not $4,560.00, and a quote that omits it understates the job by that much.
- Forgetting the site work. Major grading adds 30% — the worked example is $5,928.00 on a site needing major grading against $4,560.00 on flat ground — and a quote that prices the surface but not the excavation understates the job by $1,368.00.
- Treating the estimate as a bid. Permits, drainage, kerb and apron work and utility relocations are not in the total — a bid that includes them is higher for a reason, and a bid that omits them is not cheaper, it is incomplete.
Related tools: Fence Installation Cost Calculator — What does a fence cost? Length, material, height, terrain, gates and removal — total price, per linear foot and posts.
Frequently asked questions
How much does a new driveway cost?
GarageCalculator puts a two-car driveway at $3,600 to $5,000 in asphalt, $4,000 to $5,550 in concrete, $1,300 to $1,750 in gravel and $6,950 to $9,650 in concrete pavers. On this page a 20 by 24 ft driveway is $4,560.00 in asphalt, $5,520.00 in concrete, $1,920.00 in gravel and $10,800.00 in pavers — inside the asphalt and concrete ranges, just above the gravel and paver ranges because their bands are narrower than HomeProjectCalculator's.
How much does a driveway cost per square foot?
HomeProjectCalculator puts installed asphalt at $7 to $12 a sq ft, concrete at $8 to $18, gravel at $2 to $6 and pavers at $15 to $30. This page uses $9.50, $11.50, $4.00 and $22.50 — inside all four bands — and the worked example comes to $9.50 a sq ft all-in.
How many tons of asphalt do I need for a driveway?
Tons = area in sq ft × depth in inches ÷ 12 × 148 lb per cu ft ÷ 2,000. A 480 sq ft driveway at the standard 3 in compacted needs about 8.9 tons, and DrivewaySource's calculator gives the same 8.9 tons for the same driveway. Always add 10 to 15% for waste, compaction and irregular edges.
Does removing the old driveway add much?
GarageCalculator puts old driveway removal at about $2 a sq ft for asphalt and $3 for concrete. This page uses $2.50 a sq ft: removal adds $1,200.00 to the 480 sq ft worked example, taking it from $4,560.00 to $5,760.00.

