Home › Finance › Tile Installation Cost Calculator
Finance

Tile Installation Cost Calculator

Tile is priced by the square foot, not by the room — and the price depends on the tile first and the area second — then pushed up by the surface, the layout pattern, tearing out the old tile and the backer board and membrane underneath it. This page prices it the way tile installers price it, so the number you budget is the number an installer would actually charge — and so you can see whether the tile, the area, the pattern or the prep are what moves your total.

Free · No sign-up · Runs in your browser · First published 2026-11-11 · Updated November 2026

Tear out the old tile first
Add cement backer board
Add a waterproof membrane

The figures pre-filled here are the worked example below, built from published 2026 tile cost guides — they are starting points to edit, not a quote for your area. The price covers the tile, the labour and professional installation: thinset and grout sit inside the labour band on a contractor bid, while shower niches, curbs, heated floors, permits and delivery are priced separately. The tile quantity is counted by the tile calculator, the floor alternative by the hardwood floor installation cost calculator and the carpet installation cost calculator, and the room's area by the flooring calculator.

Total price for the job
—
JobPer sq ftTotal
Worked example: 120 sq ft, porcelain, floor, straight lay, no tear-out, no backer, no membrane, average region$22.65$2,718.00
Small bathroom: 100 sq ft, ceramic, floor, straight lay, no extras, low-cost region$13.95$1,395.00
Backsplash: 60 sq ft, porcelain, wall, diagonal, backer board, average region$29.78$1,786.50
Shower: 80 sq ft, ceramic, wall, herringbone, waterproof membrane, high-cost region$27.89$2,230.80
Large floor: 300 sq ft, porcelain, floor, straight lay, tear-out and backer board, average region$29.40$8,820.00

Every row is the same calculator at different inputs — the worked example first, then a small ceramic bathroom, a porcelain backsplash, a ceramic shower and a large porcelain floor with tear-out and backer board.

Six lines that make a tile price: tile, labour, surface, pattern, prep, region

A tile price is a material rate per square foot set by the tile, times the area with a waste factor for cuts, plus the labour per square foot multiplied by a surface factor and a pattern factor, plus tear-out, backer board and membrane where chosen, then multiplied by a region factor:

tile material ($) = rate per sq ft ($) × area (sq ft) × (1 + waste factor) — $5.00 ceramic · $7.50 wood-look porcelain · $11.50 porcelain · $22.50 natural stone; waste 10% straight · 15% diagonal or herringbone
Bar chart of the total price by tile type for 120 sq ft, floor, straight lay, no tear-out, no backer, no membrane, average region: ceramic $1,860.00, wood-look porcelain $2,190.00, porcelain $2,718.00 and natural stone $4,170.00
Total price by tile type, drawn as bars: the worked example below sits at $2,718.00 for porcelain.
labour ($) = $10.00 per sq ft × area × surface factor (×1.00 floor · ×1.20 wall) × pattern factor (×1.00 straight · ×1.15 diagonal · ×1.30 herringbone)
total ($) = (tile material + labour + tear-out $4.00 per sq ft + cement backer board $2.75 per sq ft + waterproof membrane $4.00 per sq ft) × region factor (×0.90 low-cost · ×1.00 average · ×1.10 high-cost)
price per sq ft ($) = total ÷ area
planning range = total × 0.85 to total × 1.15

The same formula is behind the table above, so every row can be rebuilt by hand. The worked example is 120 sq ft in porcelain on a floor with a straight lay, no tear-out, no backer, no membrane, average region: $11.50 × 120 × 1.10 is $1,518.00 for the tile, $10.00 × 120 × 1.00 is $1,200.00 of labour, for $2,718.00 — $22.65 a sq ft, with a planning range of $2,310.30 to $3,125.70.

Worked example, checked against the published cost guides

Four published 2026 tile cost guides bracket the worked example rather than matching it to the dollar, because no two guides price the same combination — and the bracket is the honest check. RunningFoot's worked example for the same job — 120 sq ft of porcelain on a floor, straight lay, with backer board — is $1,380 to $4,440 with a typical figure of about $2,910, and this page's same job with backer board is $3,048.00, $138.00 above their typical figure and inside their range, at $25.40 a sq ft against their $12 to $37 a sq ft band. 5estimates puts ceramic installed at $7 to $15 a sq ft and porcelain at $10 to $25 — this page's small ceramic bathroom is $13.95 a sq ft and sits inside ceramic, and its worked porcelain example is $22.65 a sq ft and sits inside porcelain. ConstructTools puts a 100 sq ft bathroom floor at $600 to $1,700 — this page's small bathroom is $1,395.00 and sits inside it — and a floor at $5 to $12 a sq ft installed, a wall at $7 to $20 and a shower at $8 to $25: this page's wall and shower rows sit above those bands because a diagonal wall and a herringbone shower carry the dearest labour factors, $13.80 and $15.60 a sq ft. Renovimo puts installed tile at $5 to $27 a sq ft — this page's worked example is $22.65 a sq ft and sits inside it, and its large floor with tear-out and backer board is $29.40 a sq ft and sits above it. The table rows show the model's edges: a porcelain backsplash is $1,786.50, a ceramic shower is $2,230.80, and a large porcelain floor with tear-out and backer board is $8,820.00.

How to read your result, and its limits

Four cautions keep the number honest. First, the tile is the base: the same 120 sq ft is $1,860.00 in ceramic and $4,170.00 in natural stone — the tile alone moves the worked example by $2,310.00 — and the difference is real, not cosmetic: ceramic is the budget floor tile, wood-look porcelain imitates timber without the water worries, porcelain is the common wet-area body, and natural stone needs sealing and a steadier hand. Second, the pattern is the hidden multiplier: the worked example as a diagonal job is $2,967.00 ($24.73 a sq ft) against $2,718.00 straight, a $249.00 difference, because the pattern raises both the waste and the labour — and a herringbone wall multiplies the labour by 1.56, which is why the shower row is $27.89 a sq ft while the same ceramic on a straight floor is $13.95. Third, measure the area you will actually tile: length times width per surface, openings you will not tile subtracted, with the waste added on top — ordering the exact area without the waste factor leaves you short by the waste, $138.00 of tile on the worked example. Fourth, the prep is a separate line: the worked example with backer board is $3,048.00 ($25.40 a sq ft) and with tear-out is $3,198.00 ($26.65 a sq ft) — neither is inside the headline $2,718.00 — and shower niches, benches, curbs, heated floors and permits are priced separately again. The cheapest combination on this page is $558.00 — 40 sq ft of ceramic on a floor in a low-cost region — and the dearest is $28,723.75 ($57.45 a sq ft), a 500 sq ft natural stone wall, herringbone, with tear-out, backer board and membrane in a high-cost region. The region is only a proxy: the worked example is $2,446.20 ($20.39 a sq ft) in a low-cost region and $2,989.80 ($24.92 a sq ft) in a high-cost one, so only local installers settle the real number. The tile quantity is counted by the tile calculator, the floor alternative by the hardwood floor installation cost calculator and the carpet installation cost calculator, and the room's area by the flooring calculator.

Common mistakes

  • Comparing a tile-only price with an installed price. Porcelain tile runs $5 to $18 a sq ft for the tile alone — this page is the installed job, so a $2,718.00 porcelain floor is the finished price, not the boxes: the labour adds $10.00 a sq ft on a straight floor.
  • Forgetting the waste factor. A straight lay wastes 10% — the worked example's tile is $1,518.00, not $1,380.00 — and ordering the exact area leaves you $138.00 short of tile on a 120 sq ft floor.
  • Pricing a wall like a floor. A wall multiplies the labour by 1.20 and a herringbone pattern by 1.30 — the shower row's labour is $15.60 a sq ft, not $10.00 — and a quote that prices a shower wall like a floor understates it by $448.00 on 80 sq ft before the membrane.
  • Forgetting the tear-out. Tear-out is $4.00 a sq ft — the worked example with tear-out is $3,198.00, not $2,718.00 — and a quote that omits it understates a replacement by $480.00 on a 120 sq ft floor.
  • Assuming thinset and grout are extra. On a contractor bid the setting materials usually sit inside the labour band, not as a separate line — this page follows that convention — so adding thinset and grout on top of the total double-counts them.

Frequently asked questions

How much does tile installation cost?

RunningFoot puts a 120 sq ft porcelain floor, straight lay, with backer board at $1,380 to $4,440 with a typical figure of about $2,910, and 5estimates puts most homeowners' typical project at around $2,000. On this page, 120 sq ft in porcelain on a floor is $2,718.00 — $22.65 a sq ft — while the same 120 sq ft in ceramic is $1,860.00 and in natural stone is $4,170.00, because the tile sets the material rate per square foot.

How much does tile installation cost per square foot?

5estimates puts ceramic installed at $7 to $15 a sq ft and porcelain at $10 to $25, and Renovimo puts installed tile at $5 to $27 a sq ft. On this page, a small ceramic bathroom floor is $13.95 a sq ft, the worked porcelain example is $22.65 a sq ft, and a large porcelain floor with tear-out and backer board is $29.40 a sq ft — the prep lines push it past the published bands.

How much extra tile do I need to order?

Measure each surface's length times width in feet, subtract the openings you will not tile, add the surfaces, then add the waste factor: 10% for a straight lay, 15% for a diagonal or herringbone pattern. The waste applies to the tile only — the labour, tear-out, backer board and membrane are charged on the actual area — so the worked example's 120 sq ft is 132 sq ft of tile to order, and ordering the exact area leaves you $138.00 short of tile.

Is tiling a wall more expensive than tiling a floor?

Yes: a wall multiplies the labour by 1.20 (RunningFoot), and the pattern multiplies it again — 1.15 for diagonal, 1.30 for herringbone — so a herringbone wall carries $15.60 a sq ft of labour against $10.00 on a straight floor. On this page, 80 sq ft of ceramic as a herringbone shower wall with a membrane is $2,230.80, while the same ceramic on a straight floor would be $1,240.00 in an average region.

Ahsan ul Haq
Editor, ToolFigure

Every ToolFigure calculator is checked against hand-worked examples before it is published — the same worked examples you can follow on each page. More about ToolFigure →

Related tools

Calculators that show their working

Free forever · No sign-up · Every result comes with its formula and a worked example.

Browse all tools