Three steps: watts, minutes, sessions a week
The whole calculation is two multiplications. Watts divided by 1,000 is kilowatts; kilowatts times the minutes a session divided by 60 is the energy of one session; the energy per session times the sessions a week times 52 weeks is the year's energy; the year's energy times the price is the year's money. The month is the year divided by 12, not the week times 4 — the two differ by a few cents, and the year-divided-by-12 figure is the one this page uses, so it agrees with the yearly total exactly:
energy per session (kWh) = watts ÷ 1,000 × minutes ÷ 60
energy per week (kWh) = energy per session × sessions a weekannual cost ($) = energy per week × 52 × electricity priceThe watts on the label are the full-heat figure, and the iron does not draw them every minute. A travel iron draws about 800 to 1,000 W, a standard home iron about 1,000 to 1,500 W, a steam iron about 1,500 to 1,800 W and a heavy-duty iron up to 2,400 W — and the thermostat switches the element off for roughly a third of the session, so the real draw is closer to two-thirds of the label. What matters is the minutes: thirty minutes at 1,200 W is 0.6 kWh, and an iron that runs for half an hour a few times a week will never be a large line on the bill, whatever the watts on the box suggest.
Worked example: 1,200 W, 30 minutes a session, 3 sessions a week, $0.17/kWh
A 1,200 W iron used for 30 minutes uses 1.2 × 30 ÷ 60 = 0.600 kWh a session, costing 10.2¢. A week is 0.6 × 3 = 1.8 kWh, costing $0.31. A month is 93.6 ÷ 12 = 7.8 kWh, costing $1.33. A year is 1.8 × 52 = 93.6 kWh, costing $15.91. The table above shows the same maths for the other iron types at 30 minutes a session, 3 sessions a week: an 800 W travel iron costs 6.8¢ a session and $10.61 a year, a 1,800 W steam iron costs 15.3¢ a session and $23.87 a year, and a 2,400 W heavy-duty iron costs 20.4¢ a session and $31.82 a year. One hour of ironing costs $0.20 at these settings, and ten years of ironing at this pace costs $159.12. A 15-minute session costs $7.96 a year at 3 sessions a week, and a 45-minute session costs $23.87; once a week costs $5.30 a year, every day costs $37.13; an hour a day costs $74.26. With the thermostat cycling at about 65% the same routine costs $10.34 a year. Four published cross-checks reproduce exactly: costtorun.app's 1,200 W iron at 30 minutes a day and 15 cents costs $0.18 an hour, $0.09 a day, $2.70 a month and $32.85 a year — this page gives the same 0.6 kWh a session, 9.0¢ and $0.18 an hour, and $32.76 a year on the week times 52 against their day-times-365 year, while its $2.70 a month is the day times 30 and this page's year-divided-by-12 month is $2.73; applianceenergycost.com's 1,200 W iron at 15 minutes a day and 16.9 cents costs 5.1¢ a day, $1.54 a month and $18.51 a year — this page gives the same 0.3 kWh a session, 5.1¢ and $1.54 a month, while its $18.51 a year is the day times 365 against this page's week-times-52 year of $18.45; joteo.net's 1,650 W steam iron at 45 minutes a session and 17 cents — this page gives the same 1.2375 kWh a session at full power, 21.0¢, while their duty-cycled session is 0.84 kWh and $0.14 against this page's 65% thermostat line of 0.80 kWh and $0.14 — the 0.04 kWh gap is the steam allowance in their table; and domesticlife.info's 1,200 W iron at 30 minutes and 15 cents costs 0.60 kWh and about $0.09 — this page gives the same 0.6 kWh a session and 9.0¢ — and their 2,000 W iron at 45 minutes costs 1.50 kWh and about $0.23, while this page gives the same 1.5 kWh and 22.5¢.
How to read your result, and its limits
Four cautions keep the number honest. First, the year is the week times 52: 93.6 kWh a year is 7.8 kWh a month and $1.33, while the week times 4 would give 7.2 kWh and $1.22 — a difference that is only a convention, and the year-divided-by-12 figure is the one that adds up to the yearly total. Second, the watts are a full-heat peak: the element cycles on the thermostat — domesticlife.info puts the effective use at 60 to 70% of the label, engineerfix at about two-thirds — so the real session is closer to 0.39 kWh than 0.60 kWh at 1,200 W, and $10.34 a year rather than $15.91. The tool prices the label watts; the 65% line prices the thermostat. Third, the minutes are the whole story: thirty minutes at 1,200 W is 0.6 kWh, but an hour a day every day would be 1.2 kWh a day and $74.26 a year — enter the minutes you actually press for, not the time the iron sits on the board. Fourth, the electricity price is the all-in rate: the total on the bill divided by the kilowatt-hours on the bill, including delivery charges. For the laundry that follows the pressing, the clothes dryer cost calculator prices the tumble by kilowatt-hours a load; for the wash before it, the washing machine cost calculator prices the cycle by watts, minutes and water temperature; and for the cost of running anything else in the house, the electricity cost calculator prices any appliance by watts and hours.
Common mistakes
- Pricing the rated watts for an hour. A 1,200 W iron for 30 minutes is 0.6 kWh and 10.2¢, not 1.2 kWh and 20.4¢ — the session is minutes, and the minutes are the whole story.
- Putting minutes in as hours. Thirty minutes is 0.5 hours, not 30 — entering 30 as the hours would price sixty sessions. Divide the minutes by 60 first: 30 ÷ 60 = 0.5.
- Multiplying the weekly cost by 4 for the month. Four weeks is not a twelfth of a year: the week times 4 gives $1.22 a month at the worked example's inputs, while the year divided by 12 gives $1.33. Use the year-divided-by-12 figure, which is the one that adds up.
- Comparing irons on watts. A 1,800 W steam iron and a 1,200 W standard iron look far apart on watts, but the press is 30 minutes either way: 0.9 kWh against 0.6 kWh, 15.3¢ against 10.2¢ — and the stronger iron may finish the pile sooner, so the cost per session can be closer still. Compare kilowatt-hours per session, not watts.
- Adding the standing charge to every session. The daily supply charge is payable whether the iron runs or not. Only the per-kWh rate belongs in the per-session maths — the fixed charge is a separate line on the bill.
Frequently asked questions
How much does it cost to run a clothes iron per hour?
A 1,200 W iron costs 20.4¢ an hour at $0.17 per kWh. A 30-minute session costs 10.2¢, and three sessions a week costs $15.91 a year — or $10.34 with the thermostat cycling at about 65%. The minutes, not the watts, are what decide the cost.
How much electricity does an iron use per session?
A 1,200 W iron pressed for 30 minutes uses 0.6 kWh at full power, costing 10.2¢ at $0.17 per kWh. With the thermostat cycling at about 65% the real session is closer to 0.39 kWh, costing 6.6¢. joteo.net's 1,650 W steam iron at 45 minutes uses 1.2375 kWh at full power and 0.84 kWh duty-cycled — the same two-thirds rule.
Does a steam iron cost more than a dry iron?
Yes, by the watts: a 1,800 W steam iron pressed for 30 minutes costs 15.3¢ a session and $23.87 a year at 3 sessions a week, against 10.2¢ and $15.91 for a 1,200 W standard iron. The steam itself adds very little — joteo.net's table allows 0.04 kWh a session for it, under a cent — so the watts, not the steam, are what you pay for.
How can I cut the cost of ironing?
Press in one sitting: a heat-up is about 2 minutes at full watts, 0.04 kWh and under a cent, so batching three sessions into one saves two heat-ups, about $0.71 a year. Iron clothes slightly damp on a lower setting, use the steam burst only where it is needed, and switch the iron off a few minutes early — the soleplate stays hot long enough to finish the last shirt.

